Toll-free: 800.362.8774 info@hydropoint.com

Flow3

Flow3 is our most flexible and affordable hydrometer. Combined with a WeatherTRAK controller, you’ll get the protection of a master valve, visibility of a flower sensor and submetering capabilities of a water meter. Because the flow sensor, master valve and water meter are all integrated into a single, powerful unit, it’s easy to install, even in tight locations.

Flow3 is ideal for:

  • New system installations
  • Retrofitting existing systems
  • Sites with limited install space
  • High pressure situations
Image
Tell Me More
Fields marked with an * are required

Benefits

  • Highly accurate performance makes it ideal for most commercial sites.
  • Built-in master valve so if a break is detected, the master valve will automatically close and prevents damage.
  • Easy to read register with sub-metering and displays that won’t lose data.
  • Easy to install.
  • Built to last: based on heavy-duty construction and no moving parts.

Product Details

Features

  • Accurate performance for commercial sites
    • Sizes: 1 ½” (Union), 2” (Threaded), 3”, 4” and 6” (Flanged)
    • 8 to 860 gallons per minute flow range
    • Accuracy across a wide flow range (up to ± 2% see chart on back)
  • Powerful mainline control
    • Prevent catastrophic water loss
    • Double-chambered valve provides quick acting and positive opening and closing
  • Easy to read register
    • Provides on-site submetering
    • Two register options: Photo Diode – high frequency or Reed Switch – low frequency
    • Odometer style register displays won’t lose data
  • Easy to install
    • Requires no straight pipe upstream or downstream of unit
    • Low installation cost vs. installing each component separately
    • Ideal for installations where space is limited
  • Built to last
    • Heavy-duty cast iron construction with corrosion-resistant body
    • Stainless steel encapsulated registers guaranteed against fogging due to moisture

Models

WeatherTRAK Flow3 Model - Union & Threaded
WeatherTRAK Flow3 Model - Flanged

Register Options

Photo Diode High frequency pulse output
For systems containing drip and/or high efficiency/rotary nozzles zones

From 0.005 gallons per pulse
10 to 200 pulses per second (depending on flow rate)
Superior leak visibility
Combines an IR light source and a light sensitive diode (power supply included)

Photo Diode
Reed Switch High frequency pulse output
For systems with station flow rates of 10+ GPM and are less concerned about small leaks

1 gallons per pulse
Leak indicator dial in the center of register
Magnetic coupling activated

Reed Switch

Performance Data


SIZE
LOWEST FLOW
WITHIN ± 5% ACCURACY (GPM)
LOWEST FLOW
WITHIN ± 2% ACCURACY (GPM)
NOMINAL FLOW
WITHIN ± 2% ACCURACY (GPM)
MAXIMUM FLOW
WITHIN ± 2% ACCURACY (GPM)
1 ½”1.84.44455
2"5.3206695
3"1453176220
4"2179264380
6"53198660860

Flow Range


SIZE
MIN GPM
± 5%
MAX GPM
± 5%
1 ½”1.855
2"5.395
3"14220
4"21380
6"53860

Fiction Loss v. Pressure Loss (psi)

flow3-friction1

Ordering Information

flow3-specify

Specifications

  • Sizes: 1 1/2″, 2″, 3″, 4″, and 6″
  • Maximum working pressure: 235 psi
  • Minimum working pressure: 14 psi
  • Body: Cast iron, polyester coated
  • Connections: Threaded, flanged
  • Register Types: Reed Switch, Photo Diode
  • Register: Odometer style with 3 fractional dials
  • Power: photo diode requires a constant supply of DC power
  • Valve diaphragm: Reinforced natural rubber
  • Flanges: Drilled according to ANSI specification
  • Standards: EEC approval (class A)
  • Compatible with: ET Pro3, ET Pro3 2 wire, LC Controllers, WeatherTRAK FlowLink, FlowShare, and WeatherTRAK Central

Specifications

Download WeatherTRAK Flow3 Specifications (ZIP, 8MB)
Contains: (PDF) (DWG) (DFX) (JPEG)

  • Sizes: 1 1/2″, 2″, 3″, 4″, and 6″
  • Maximum working pressure: 235 psi
  • Minimum working pressure: 14 psi
  • Body: Cast iron, polyester coated
  • Connections: Threaded, flanged
  • Register Types: Reed Switch, Photo Diode
  • Register: Odometer style with 3 fractional dials
  • Power: photo diode requires a constant supply of DC power
  • Valve diaphragm: Reinforced natural rubber
  • Flanges: Drilled according to ANSI specification
  • Standards: EEC approval (class A)
  • Compatible with: ET Pro3, ET Pro3 2 wire, LC Controllers, WeatherTRAK FlowLink, FlowShare, and WeatherTRAK Central

Product Documents